News Categories

E&J make lifepo4 batteries with smart shunt battery monitors fit NMEA 2000


E&J Technology Group developed/produced smart lifepo4 batteries and smart shunt/smart battery monitors series to use on the marine field comply NMEA 2000.

NMEA 2000® is a higher layer protocol developed and maintained by the National Marine Electronics Association as a communications standard for the marine industry. This higher layer protocol is used primarily on boats and ships to connect equipment such as GPS, auto pilots, depth sounders, navigation instruments, engines, etc.

The NMEA 2000® protocol is based on the J1939 higher layer protocol, as specified in ISO 11783, with the addition of Fast Packet transfer method and PGNs for marine-specific data. To reduce reflection issues and allow for hot swapping nodes, a NMEA 2000® bus is set up with a ‘backbone’ or a main cable that runs throughout the vessel. Individual pieces of equipment, or ‘nodes’, are connected to this backbone by drop cables to communicate in an ‘all-listen’, ‘all-talk’ broadcast network.

  • The International version of the standard is documented as IEC61162-3.
  • The standardized bus speed is 250 kbit/s bus speed.
  • Protocol is based on J1939 (ISO11898 and ISO 11783).
  • Physical Layer based on DeviceNet cables and Micro-C and Mini-C connectors.
  • Power is provided over the NMEA 2000® bus.

More details related to our smart lifepo4 batteries and smart battery monitors comply NMEA 2000, pls contact us anytime.